-- ***************************************************************** -- NMS-NAT.my: NMS NAT MIB file -- OCT. 25 2003 -- ***************************************************************** -- NMS-NAT DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI DisplayString FROM RFC1213-MIB nmsMgmt FROM NMS-SMI; nmsNatMIB MODULE-IDENTITY LAST-UPDATED "200310250000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB module defines the generic managed objects for NAT." ::= { nmsMgmt 100 } nmsNatObjects OBJECT IDENTIFIER ::= { nmsNatMIB 1 } -- The NAT PAT link Table --.1 nmsNatSessionNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the total session in the NAPT rule." ::= { nmsNatObjects 1 } --jiudian mib .2.1.1--.2.1.12 nmsNatSessionTableJD OBJECT-TYPE SYNTAX SEQUENCE OF NMSNatSessionEntryJD ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table containing one entry for each NAT session currently active on this NAT device." ::= { nmsNatObjects 2 } nmsNatSessionEntryJD OBJECT-TYPE SYNTAX NMSNatSessionEntryJD ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) containing information about an active NAT session on this NAT device." INDEX { nmsNatSessionId } ::= { nmsNatSessionTableJD 1 } NMSNatSessionEntryJD ::= SEQUENCE { nmsNatSessionIdJD OCTET STRING, nmsNatSessionProtocolTypeJD INTEGER, nmsNatSessionDirectionJD INTEGER, nmsNatSessionIntAddrJD OCTET STRING, nmsNatSessionIntPortJD INTEGER, nmsNatSessionExtAddrJD IpAddress, nmsNatSessionExtPortJD INTEGER, nmsNatSessionRemoteAddrJD IpAddress, nmsNatSessionRemotePortJD INTEGER, nmsNatSessionUpTimeJD TimeTicks, nmsNatSessionIdletimeJD TimeTicks, nmsNatSessionContextJD DisplayString, nmsNATLimitedHostSessionsJD INTEGER, nmsNATHostFlowsJD INTEGER } nmsNatSessionIdJD OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The session ID for this NAT session." ::= { nmsNatSessionEntryJD 1 } nmsNatSessionProtocolTypeJD OBJECT-TYPE SYNTAX INTEGER{ other (-1), -- not specified icmp (1), udp (2), tcp (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol type of this session. TCP and UDP sessions are uniquely identified by the tuple of (source IP address, source UDP/TCP port, destination IP address, destination TCP/UCP port). ICMP query sessions are identified by the tuple of (source IP address, ICMP query ID, destination IP address)." ::= { nmsNatSessionEntryJD 2 } nmsNatSessionDirectionJD OBJECT-TYPE SYNTAX INTEGER { inbound (1), outbound (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The direction of this session with respect to the local network. 'inbound' indicates that this session was initiated from the public network into the private network. 'outbound' indicates that this session was initiated from the private network into the public network." ::= { nmsNatSessionEntryJD 3 } nmsNatSessionIntAddrJD OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The original IP address of the session endpoint that lies in the private network." ::= { nmsNatSessionEntryJD 4 } nmsNatSessionIntPortJD OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The original transport port of the session endpoint that belongs to the private network. If this is an ICMP session then the value is the ICMP request ID." ::= { nmsNatSessionEntryJD 5 } nmsNatSessionExtAddrJD OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The translated IP address of the session endpoint that lies in the private network." ::= { nmsNatSessionEntryJD 6 } nmsNatSessionExtPortJD OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The original IP address of the session endpoint that lies in the public network." ::= { nmsNatSessionEntryJD 7 } nmsNatSessionRemoteAddrJD OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS current DESCRIPTION "The original IP address of the session endpoint that lies in the public network." ::= { nmsNatSessionEntryJD 8 } nmsNatSessionRemotePortJD OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The original transport port of the session endpoint that belongs to the public network. If this is an ICMP session then the value contains the ICMP request ID." ::= { nmsNatSessionEntryJD 9 } nmsNatSessionUpTimeJD OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The up time of this session in one-hundredths of a second." ::= { nmsNatSessionEntryJD 10 } nmsNatSessionIdletimeJD OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS current DESCRIPTION "The time in one-hundredths of a second since a packet belonging to this session was last detected." ::= { nmsNatSessionEntryJD 11 } nmsNatSessionContextJD OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about the protocol context of the session." ::= { nmsNatSessionEntryJD 12 } -- wangba mib .3 nmsNATLimitedTotalSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the total permitted session in the NAPT rule." ::= { nmsNatObjects 3 } -- .4.1.1 - .4.1.14 NMSNatSessionEntry ::= SEQUENCE { nmsNatSessionId OCTET STRING, nmsNatSessionProtocolType OCTET STRING, nmsNatSessionDirection OCTET STRING, nmsNatSessionIntAddr OCTET STRING, nmsNatSessionIntPort OCTET STRING, nmsNatSessionExtAddr OCTET STRING, nmsNatSessionExtPort OCTET STRING, nmsNatSessionRemoteAddr OCTET STRING, nmsNatSessionRemotePort OCTET STRING, nmsNatSessionUpTime OCTET STRING, nmsNatSessionIdletime OCTET STRING, nmsNatSessionContext OCTET STRING, nmsNATLimitedHostSessions OCTET STRING, nmsNATHostFlows OCTET STRING } nmsNatSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF NMSNatSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table containing one entry for each NAT session currently active on this NAT device." ::= { nmsNatObjects 4 } nmsNatSessionEntry OBJECT-TYPE SYNTAX NMSNatSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) containing information about an active NAT session on this NAT device." INDEX { nmsNatSessionId } ::= { nmsNatSessionTable 1 } nmsNatSessionId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The session ID for this NAT session." ::= { nmsNatSessionEntry 1 } nmsNatSessionProtocolType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The protocol type of this session. TCP and UDP sessions are uniquely identified by the tuple of (source IP address, source UDP/TCP port, destination IP address, destination TCP/UCP port). ICMP query sessions are identified by the tuple of (source IP address, ICMP query ID, destination IP address)." ::= { nmsNatSessionEntry 2 } nmsNatSessionDirection OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The direction of this session with respect to the local network. 'inbound' indicates that this session was initiated from the public network into the private network. 'outbound' indicates that this session was initiated from the private network into the public network." ::= { nmsNatSessionEntry 3 } nmsNatSessionIntAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The original IP address of the session endpoint that lies in the private network." ::= { nmsNatSessionEntry 4 } nmsNatSessionIntPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The original transport port of the session endpoint that belongs to the private network. If this is an ICMP session then the value is the ICMP request ID." ::= { nmsNatSessionEntry 5 } nmsNatSessionExtAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The translated IP address of the session endpoint that lies in the private network." ::= { nmsNatSessionEntry 6 } nmsNatSessionExtPort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The original IP address of the session endpoint that lies in the public network." ::= { nmsNatSessionEntry 7 } nmsNatSessionRemoteAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The original IP address of the session endpoint that lies in the public network." ::= { nmsNatSessionEntry 8 } nmsNatSessionRemotePort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The original transport port of the session endpoint that belongs to the public network. If this is an ICMP session then the value contains the ICMP request ID." ::= { nmsNatSessionEntry 9 } nmsNatSessionUpTime OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The up time of this session in one-hundredths of a second." ::= { nmsNatSessionEntry 10 } nmsNatSessionIdletime OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The time in one-hundredths of a second since a packet belonging to this session was last detected." ::= { nmsNatSessionEntry 11 } nmsNatSessionContext OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about the protocol context of the session." ::= { nmsNatSessionEntry 12 } nmsNATLimitedHostSessions OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The number of the permitted single session in the NAPT rule." ::= { nmsNatSessionEntry 13 } nmsNATHostFlows OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The bytes number of each link during one period." ::= { nmsNatSessionEntry 14 } nmsNatCpuPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the total cpu usage percent." ::= { nmsNatObjects 5 } nmsNatHeapPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the total heap allocation percent." ::= { nmsNatObjects 6 } nmsNatMblkPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the total Mblk allocation percent." ::= { nmsNatObjects 7 } nmsNathostlimitset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "set the count that nat can service for inside users" ::= { nmsNatObjects 8 } nmsNathostlimitcurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "currently, nat service how many inside user." ::= { nmsNatObjects 9 } nmsNathostlimitenable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "enable limit-user function." ::= { nmsNatObjects 10 } nmsNatIf OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "the ifindex of NAT Interface." ::= { nmsNatObjects 11 } -- End of table END