-- -- NMS MEAPS MIB -- 2011.07.14 Twx -- Last Update: 2011.07.14 -- NMS-MEAPS-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 nmslocal FROM NMS-SMI; -- -- Node definitions -- -- 1.3.6.1.4.1.27514.2.X nmsMEAPS OBJECT IDENTIFIER ::={ nmslocal 234 } -- 1.3.6.1.4.1.27514.2.X.1 nmsMEAPSDomains OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of running ethernet domain instances." ::={ nmsMEAPS 1 } -- 1.3.6.1.4.1.27514.2.X.2 nmsMEAPSPduRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input EAPS PDUs." ::={ nmsMEAPS 2 } -- 1.3.6.1.4.1.27514.2.X.3 nmsMEAPSPduTx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of output EAPS PDUs." ::={ nmsMEAPS 3 } -- 1.3.6.1.4.1.27514.2.X.4 nmsMEAPSDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF NMSMEAPSDomainTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet domain instances." ::= { nmsMEAPS 4 } -- 1.3.6.1.4.1.27514.2.X.4.1 nmsMEAPSDomainTableEntry OBJECT-TYPE SYNTAX NMSMEAPSDomainTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet domain instances." INDEX { nmsMEAPSDomainID } ::= { nmsMEAPSDomainTable 1 } NMSMEAPSDomainTableEntry ::= SEQUENCE { nmsMEAPSDomainID INTEGER, nmsMEAPSRings INTEGER, nmsMEAPSRowStatus INTEGER } -- 1.3.6.1.4.1.27514.2.X.4.1.1 nmsMEAPSDomainID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of ethernet domain instances." ::={ nmsMEAPSDomainTableEntry 1 } -- 1.3.6.1.4.1.27514.2.X.4.1.2 nmsMEAPSRings OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A value indicates the node-type of this device in the domain." ::={ nmsMEAPSDomainTableEntry 2 } -- 1.3.6.1.4.1.27514.2.X.4.1.3 nmsMEAPSRowStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), running(2) } ACCESS read-create STATUS mandatory DESCRIPTION "A read-create value that indicates the configuration status of the domain instance. Set this value to 'enabled' to start the ring or 'disabled' to stop it. The value 'running' indicates that the domain is currently configured and running, in which case, the values of node-type and control-vlan cannot be modified." ::={ nmsMEAPSDomainTableEntry 3 } -- 1.3.6.1.4.1.27514.2.X.5 nmsMEAPSRingTable OBJECT-TYPE SYNTAX SEQUENCE OF NMSMEAPSRingTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet ring instances." ::= { nmsMEAPS 5 } -- 1.3.6.1.4.1.27514.2.X.5.1 nmsMEAPSRingTableEntry OBJECT-TYPE SYNTAX NMSMEAPSRingTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet ring instances." INDEX { nmsMEAPSRingID } ::= { nmsMEAPSRingTable 1 } NMSMEAPSRingTableEntry ::= SEQUENCE { nmsMEAPSRingID INTEGER, nmsMEAPSRingLevel INTEGER, nmsMEAPSRingNodeType INTEGER, nmsMEAPSRingControlVlanMajor INTEGER, nmsMEAPSRingControlVlanSub INTEGER, nmsMEAPSRingPorts INTEGER, nmsMEAPSRingState INTEGER, nmsMEAPSRingHealthCheck INTEGER, nmsMEAPSRingChannelCheck INTEGER, nmsMEAPSRingChannelRecovery INTEGER, nmsMEAPSRingHelloTime INTEGER, nmsMEAPSRingFailTime INTEGER, nmsMEAPSRingPreforwardTime INTEGER, nmsMEAPSRingEdgeHelloTime INTEGER, nmsMEAPSRingEdgeFailTime INTEGER, nmsMEAPSRingAdminStatus INTEGER, nmsMEAPSRingPrimaryPort INTEGER, nmsMEAPSRingPrimaryPortState INTEGER, nmsMEAPSRingPrimaryPortStatus INTEGER, nmsMEAPSRingSecondaryPort INTEGER, nmsMEAPSRingSecondaryPortState INTEGER, nmsMEAPSRingSecondaryPortStatus INTEGER } -- 1.3.6.1.4.1.27514.2.X.5.1.1 nmsMEAPSRingID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of ethernet ring instances." ::={ nmsMEAPSRingTableEntry 1 } -- 1.3.6.1.4.1.27514.2.X.5.1.2 nmsMEAPSRingLevel OBJECT-TYPE SYNTAX INTEGER { unknown(0), majorRing(1), subRing(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value indicates the level of this device in the ring." ::={ nmsMEAPSRingTableEntry 2 } -- 1.3.6.1.4.1.27514.2.X.5.1.3 nmsMEAPSRingNodeType OBJECT-TYPE SYNTAX INTEGER { unknown(0), masterNode(1), transitNode(2), edgeNode(3), assistantNode(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A value indicates the node-type of this device in the ring." ::={ nmsMEAPSRingTableEntry 3 } -- 1.3.6.1.4.1.27514.2.X.5.1.4 nmsMEAPSRingControlVlanMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The id of the major VLAN in which EAPS PDUs are transmitted." ::={ nmsMEAPSRingTableEntry 4 } -- 1.3.6.1.4.1.27514.2.X.5.1.5 nmsMEAPSRingControlVlanSub OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The id of the sub VLAN in which EAPS PDUs are transmitted." ::={ nmsMEAPSRingTableEntry 5 } -- 1.3.6.1.4.1.27514.2.X.5.1.6 nmsMEAPSRingPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of interfaces which are configured in a ring." ::={ nmsMEAPSRingTableEntry 6 } -- 1.3.6.1.4.1.27514.2.X.5.1.7 nmsMEAPSRingState OBJECT-TYPE SYNTAX INTEGER { unknown(0), complete(1), ringFault(2) } ACCESS read-only STATUS mandatory DESCRIPTION "A value indicates the state of a node in the ring. Only the value from a MasterNode indicates the state of the whole ring. The value from a TransitNode means the local ring ports are all operational or not." ::={ nmsMEAPSRingTableEntry 7 } -- 1.3.6.1.4.1.27514.2.X.5.1.8 nmsMEAPSRingHealthCheck OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "A value indicates whether Health packets are being sent from MasterNode. Available only for MasterNodes." ::={ nmsMEAPSRingTableEntry 8 } -- 1.3.6.1.4.1.27514.2.X.5.1.9 nmsMEAPSRingHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The inteval between the transmit of two Health packets, in seconds. Available only for MasterNodes." ::={ nmsMEAPSRingTableEntry 9 } -- 1.3.6.1.4.1.27514.2.X.5.1.10 nmsMEAPSRingFailTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The hold time for the SecondaryPort after a Health packet is received, in seconds. Available only for MasterNodes." ::={ nmsMEAPSRingTableEntry 10 } -- 1.3.6.1.4.1.27514.2.X.5.1.11 nmsMEAPSRingPreforwardTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The hold time for a TransitPort which is recovered from a failure, in seconds. During the pre-forward time, no packets other than PDUs in control vlan can be forwarded. Only available for TransitNodes." ::={ nmsMEAPSRingTableEntry 11 } -- 1.3.6.1.4.1.27514.2.X.5.1.12 nmsMEAPSRingEdgeHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The hold time for a TransitPort which is recovered from a failure, in seconds. During the pre-forward time, no packets other than PDUs in control vlan can be forwarded. Only available for TransitNodes." ::={ nmsMEAPSRingTableEntry 12 } -- 1.3.6.1.4.1.27514.2.X.5.1.13 nmsMEAPSRingEdgeFailTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The hold time for a TransitPort which is recovered from a failure, in seconds. During the pre-forward time, no packets other than PDUs in control vlan can be forwarded. Only available for TransitNodes." ::={ nmsMEAPSRingTableEntry 13 } -- 1.3.6.1.4.1.27514.2.X.5.1.14 nmsMEAPSRingAdminStatus OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1), running(2) } ACCESS read-create STATUS mandatory DESCRIPTION "A read-create value that indicates the configuration status of the ring instance. Set this value to 'enabled' to start the ring or 'disabled' to stop it. The value 'running' indicates that the ring is currently configured and running, in which case, the values of node-type and control-vlan cannot be modified." ::={ nmsMEAPSRingTableEntry 14 } -- 1.3.6.1.4.1.27514.2.X.5.1.15 nmsMEAPSRingPrimaryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface index of the primary-port if the 'nmsMEAPSRingNodeType' is 'masterNode', or the ifIndex of the first transit-port if 'transitNode'. Value 0 means that this port is not configured." ::={ nmsMEAPSRingTableEntry 15 } -- 1.3.6.1.4.1.27514.2.X.5.1.16 nmsMEAPSRingPrimaryPortState OBJECT-TYPE SYNTAX INTEGER { unknown(0), forwarding(1), preforwarding(2), blocking(3), edgepreforwarding(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The forwarding state of the primary-port or the first transit-port." ::={ nmsMEAPSRingTableEntry 16 } -- 1.3.6.1.4.1.27514.2.X.5.1.17 nmsMEAPSRingPrimaryPortStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), link-up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The link status of the primary-port or the first transit-port." ::={ nmsMEAPSRingTableEntry 17 } -- 1.3.6.1.4.1.27514.2.X.5.1.18 nmsMEAPSRingSecondaryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface index of the secondary-port if the 'nmsMEAPSRingNodeType' is 'masterNode', or the ifIndex of the second transit-port if 'transitNode'. Value 0 means that this port is not configured." ::={ nmsMEAPSRingTableEntry 18 } -- 1.3.6.1.4.1.27514.2.X.5.1.19 nmsMEAPSRingSecondaryPortState OBJECT-TYPE SYNTAX INTEGER { unknown(0), forwarding(1), preforwarding(2), blocking(3), edgepreforwarding(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The forwarding state of the secondary-port or the second transit-port." ::={ nmsMEAPSRingTableEntry 19 } -- 1.3.6.1.4.1.27514.2.X.5.1.20 nmsMEAPSRingSecondaryPortStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), link-up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The link status of the secondary-port or the second transit-port." ::={ nmsMEAPSRingTableEntry 20 } -- 1.3.6.1.4.1.27514.2.X.6 nmsMEAPSRingPortTable OBJECT-TYPE SYNTAX SEQUENCE OF NMSMEAPSRingPortTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet ring ports." ::= { nmsMEAPS 6 } -- 1.3.6.1.4.1.27514.2.X.6.1 nmsMEAPSRingPortTableEntry OBJECT-TYPE SYNTAX NMSMEAPSRingPortTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information of ethernet ring ports." INDEX { nmsMEAPSRingPortRingID, nmsMEAPSRingPort } ::= { nmsMEAPSRingPortTable 1 } NMSMEAPSRingPortTableEntry ::= SEQUENCE { nmsMEAPSRingPortRingID INTEGER, nmsMEAPSRingPort INTEGER, nmsMEAPSRingPortType INTEGER, nmsMEAPSRingPortState INTEGER, nmsMEAPSRingPortForwards INTEGER, nmsMEAPSRingPortRx INTEGER, nmsMEAPSRingPortTx INTEGER, nmsMEAPSRingPortStatus INTEGER } -- 1.3.6.1.4.1.27514.2.X.6.1.1 nmsMEAPSRingPortRingID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of an ethernet ring instance, in which this port is configured." ::={ nmsMEAPSRingPortTableEntry 1 } -- 1.3.6.1.4.1.27514.2.X.6.1.2 nmsMEAPSRingPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the ring port." ::={ nmsMEAPSRingPortTableEntry 2 } -- 1.3.6.1.4.1.27514.2.X.6.1.3 nmsMEAPSRingPortType OBJECT-TYPE SYNTAX INTEGER { unknown(0), primaryPort(1), secondaryPort(2), transitPort(3), commonPort(4), edgePort(5) } ACCESS read-only STATUS mandatory DESCRIPTION "A value indicates the type of a ring port." ::={ nmsMEAPSRingPortTableEntry 3 } -- 1.3.6.1.4.1.27514.2.X.6.1.4 nmsMEAPSRingPortState OBJECT-TYPE SYNTAX INTEGER { unknown(0), forwarding(1), preforwarding(2), blocking(3), edgepreforwarding(4) } ACCESS read-only STATUS mandatory DESCRIPTION "A value indicates the forward state of a ring port in data vlans." ::={ nmsMEAPSRingPortTableEntry 4 } -- 1.3.6.1.4.1.27514.2.X.6.1.5 nmsMEAPSRingPortForwards OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned to forwarding state." ::={ nmsMEAPSRingPortTableEntry 5 } -- 1.3.6.1.4.1.27514.2.X.6.1.6 nmsMEAPSRingPortRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of received EAPS PDUs on this port." ::={ nmsMEAPSRingPortTableEntry 6 } -- 1.3.6.1.4.1.27514.2.X.6.1.7 nmsMEAPSRingPortTx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Number of transmitted EAPS PDUs on this port." ::={ nmsMEAPSRingPortTableEntry 7 } -- 1.3.6.1.4.1.27514.2.X.6.1.8 nmsMEAPSRingPortStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), link-up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The link status of the ring port." ::={ nmsMEAPSRingPortTableEntry 8 } -- Notifications -- 1.3.6.1.4.1.27514.2.X.7 nmsMEAPSRingNotifications OBJECT IDENTIFIER ::= { nmsMEAPS 7 } nmsMEAPSRingNotification NOTIFICATION-TYPE OBJECTS { nmsMEAPSRingID, nmsMEAPSRingNodeType, nmsMEAPSRingState } STATUS current DESCRIPTION "This notification is generated when a MasterNode detects that the state of ring is changed." ::= { nmsMEAPSRingNotifications 1 } END