-- ***************************************************************** -- NMS-HAL-IF-MIB.my: -- FEB 2012 -- ***************************************************************** -- NMS-HAL-IF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,IpAddress FROM SNMPv2-SMI Gauge,TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB nmsMgmt FROM NMS-SMI PhysAddress,MacAddress FROM SNMPv2-TC nmsIfObjects FROM NMS-IF-MIB ipv6InterfaceIdentifier FROM IP-MIB; physicalIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalIfConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical interface configuration entries." ::= { nmsIfObjects 3 } physicalIfConfigEntry OBJECT-TYPE SYNTAX PhysicalIfConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface configuration entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifConfigIndex } ::= { physicalIfConfigTable 1 } PhysicalIfConfigEntry ::= SEQUENCE { ifConfigIndex INTEGER, keepalive INTEGER, speed INTEGER, duplex INTEGER, medium INTEGER, fiberAutoConfig INTEGER, flowControl INTEGER, errorFrameCheck INTEGER, phyIfType INTEGER } ifConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface. The same value as ifIndex in ifTable of RFC1213." ::= { physicalIfConfigEntry 1 } keepalive OBJECT-TYPE SYNTAX INTEGER(0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Loopback detect of interface. The range is 0-32767. 0 means disable. Default is 0(disable)." ::= { physicalIfConfigEntry 2 } speed OBJECT-TYPE SYNTAX INTEGER{ auto(1), speed-10M(2), speed-100M(3), speed-1000M(4), speed-10000M(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface speed. Only valid for non-PON interface. 1-auto, 2-10M, 3-100M, 4-1000M, 5-10000M. Default is auto." ::= { physicalIfConfigEntry 3 } duplex OBJECT-TYPE SYNTAX INTEGER{ auto(1), full(2), half(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface duplex. Only valid for non-PON interface. 1-auto, 2-full, 3-half. Default is auto." ::= { physicalIfConfigEntry 4 } medium OBJECT-TYPE SYNTAX INTEGER{ auto(1), copper(2), fiber(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface medium. Only valid for non-PON interface. 1-auto, 2-copper, 3-fiber. Default is auto." ::= { physicalIfConfigEntry 5 } fiberAutoConfig OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Fiber port auto config mode, include speed and duplex. 1-enable, 2-disable. Default is disable." ::= { physicalIfConfigEntry 6 } flowControl OBJECT-TYPE SYNTAX INTEGER{ on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Interface flow control config. 1-on, 2-off. Default is off." ::= { physicalIfConfigEntry 7 } errorFrameCheck OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Error frame check config. 1-enable, 2-disable. Default is disable." ::= { physicalIfConfigEntry 8 } phyIfType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2), combo(3), other(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Port initial type. 1-copper, 2-fiber, 3-combo, 4-other." ::= { physicalIfConfigEntry 9 } physicalIfBlockTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalIfBlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical interface Block entries." ::= { nmsIfObjects 4 } physicalIfBlockEntry OBJECT-TYPE SYNTAX PhysicalIfBlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface Block entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifBlockIndex } ::= { physicalIfBlockTable 1 } PhysicalIfBlockEntry ::= SEQUENCE { ifBlockIndex INTEGER, broadcastBlock INTEGER, multicastBlock INTEGER, unicastBlock INTEGER } ifBlockIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface. The same value as ifIndex in ifTable of RFC1213." ::= { physicalIfBlockEntry 1 } broadcastBlock OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast block config. 1-enable, 2-disable. Default is disable." ::= { physicalIfBlockEntry 2 } multicastBlock OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Multicast block config. 1-enable, 2-disable. Default is disable." ::= { physicalIfBlockEntry 3 } unicastBlock OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Unknown unicast block config. 1-enable, 2-disable. Default is disable." ::= { physicalIfBlockEntry 4 } ifSecurity OBJECT IDENTIFIER ::= { nmsIfObjects 5 } --portSecurityTable portSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface security entries." ::= { ifSecurity 1 } portSecurityEntry OBJECT-TYPE SYNTAX PortSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface security entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifSecurityIndex } ::= { portSecurityTable 1 } PortSecurityEntry ::= SEQUENCE { ifSecurityIndex INTEGER, mode INTEGER, maxMacAddressNum INTEGER, maxMacAddressNumCapability INTEGER } ifSecurityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface. The same value as ifIndex in ifTable of RFC1213." ::= { portSecurityEntry 1 } mode OBJECT-TYPE SYNTAX INTEGER{ dynamic(1), static-accept(2), static-reject(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Port security mode. 1-dynamic, 2-static accept, 3-static reject, 4-none. LLID interface only support dynamic mode. PON and PSG interface don't support any mode. Default is none mode(4)." ::= { portSecurityEntry 2 } maxMacAddressNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Max mac address number that interface is allowed learning. Min num is 1. Max num is different for different device. Default is 1." ::= { portSecurityEntry 3 } maxMacAddressNumCapability OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Capability of mac address learning limitation. " ::= { portSecurityEntry 4 } --portSecurityStaticMacAddressEntryTable portSecurityStaticMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityStaticMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface security static MAC address entries." ::= { ifSecurity 2 } portSecurityStaticMacAddressEntry OBJECT-TYPE SYNTAX PortSecurityStaticMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface security static mac address entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifSecurityStaticMacAddrIndex,ifMacAddress } ::= { portSecurityStaticMacAddressTable 1 } PortSecurityStaticMacAddressEntry ::= SEQUENCE { ifSecurityStaticMacAddrIndex INTEGER, ifMacAddress MacAddress, operation INTEGER } ifSecurityStaticMacAddrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indexs of interface. The same value as ifIndex in ifTable of RFC1213." ::= { portSecurityStaticMacAddressEntry 1 } ifMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indexs of interface. Static mac address of port security." ::= { portSecurityStaticMacAddressEntry 2 } operation OBJECT-TYPE SYNTAX INTEGER{ add(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The operation of static mac address. 1-add, 2-delete." ::= { portSecurityStaticMacAddressEntry 3 } --portSecurityBindBlockEntry portSecurityBindBlockTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityBindBlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface security binding block entries." ::= { ifSecurity 3 } portSecurityBindBlockEntry OBJECT-TYPE SYNTAX PortSecurityBindBlockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface security binding block entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifSecurityBindBlockIndex,ifBindBlockMacAddress,ifBindBlockIPAddress,ifBindBlockIPV6Address } ::= { portSecurityBindBlockTable 1 } PortSecurityBindBlockEntry ::= SEQUENCE { ifSecurityBindBlockIndex INTEGER, ifBindBlockMacAddress MacAddress, ifBindBlockIPAddress IpAddress, ifBindBlockIPV6Address OCTET STRING, mode INTEGER } ifSecurityBindBlockIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indexs of interface. The same value as ifIndex in ifTable of RFC1213." ::= { portSecurityBindBlockEntry 1 } ifBindBlockMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indexs of interface. MAC address. If not care mac address, the value should be set to FFFFFF." ::= { portSecurityBindBlockEntry 2 } ifBindBlockIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indexs of interface. Ip address. If not care ip address, the value should be set to 255.255.255.255 ." ::= { portSecurityBindBlockEntry 3 } ifBindBlockIPV6Address OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Indexs of interface. Ipv6 address. If not care ipv6 address, all bit value should be set to 1." ::= { portSecurityBindBlockEntry 4 } mode OBJECT-TYPE SYNTAX INTEGER{ bind-mac(1), bind-ip(2), bind-arp(3), bind-arp-ip(4), bind-ip-mac(5), bind-arp-mac(6), bind-arp-ip-mac(7), bind-ipv6(8), bind-ipv6-mac(9), block-mac(10), block-ip(11), block-arp(12), block-arp-ip(13), block-ip-mac(14), block-arp-mac(15), block-arp-ip-mac(16), block-ipv6(17), block-ipv6-mac(18) } ACCESS read-write STATUS mandatory DESCRIPTION "The config mode.0:del,1:bind mac,2:bind ip,3:bind arp,4:bind arp ip,5:bind ip mac,6:bind arp mac, 7:bind arp ip mac,8:bind ipv6,9:bind ipv6 mac,10:block mac,11:block ip ,12:block arp,13:block arp ip, 14:block ip mac,15:block arp mac,16:block arp ip mac,17:block ipv6,18:block ipv6 mac" ::= { portSecurityBindBlockEntry 5 } --vlanSecurityEntry vlanSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of VLAN security entries." ::= { ifSecurity 4 } vlanSecurityEntry OBJECT-TYPE SYNTAX VlanSecurityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface VLAN security entry containing objects at the subnetwork layer and below for a particular interface." INDEX { securityVlanID } ::= { vlanSecurityTable 1 } VlanSecurityEntry ::= SEQUENCE { securityVlanID INTEGER, dynamicMacAddress INTEGER } securityVlanID OBJECT-TYPE SYNTAX INTEGER(1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "VlanID to config. The range is 1-4094" ::= { vlanSecurityEntry 1 } dynamicMacAddress OBJECT-TYPE SYNTAX INTEGER(0..32768) ACCESS read-write STATUS mandatory DESCRIPTION "The max number of mac address to be learned. The range is 1-32768. 0 means disable. Default is disable." ::= { vlanSecurityEntry 2 } --portProtectTable ifProtect OBJECT IDENTIFIER ::= { nmsIfObjects 6 } --portProtectGroupTable portProtectGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF PortProtectGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port Protect Group entries." ::= { ifProtect 1 } portProtectGroupEntry OBJECT-TYPE SYNTAX PortProtectGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface port Protect Group entry containing objects at the subnetwork layer and below for a particular interface." INDEX { groupID } ::= { portProtectGroupTable 1 } PortProtectGroupEntry ::= SEQUENCE { groupID INTEGER, ifProtectGroupOperation INTEGER } groupID OBJECT-TYPE SYNTAX INTEGER(1..32) ACCESS read-write STATUS mandatory DESCRIPTION "The groupID of port protect. The range is 1-32." ::= { portProtectGroupEntry 1 } ifProtectGroupOperation OBJECT-TYPE SYNTAX INTEGER{ add(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The operation of group. 1-add, 2-delete." ::= { portProtectGroupEntry 2 } --portProtectAppTable portProtectAppTable OBJECT-TYPE SYNTAX SEQUENCE OF PortProtectAppEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port Protect Application entries." ::= { ifProtect 2 } portProtectAppEntry OBJECT-TYPE SYNTAX PortProtectAppEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface port Protect Application entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifProtectAppIndex } ::= { portProtectAppTable 1 } PortProtectAppEntry ::= SEQUENCE { ifProtectAppIndex INTEGER, ifGroupIDApp INTEGER } ifProtectAppIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indexs of interface. The same value as ifIndex in ifTable of RFC1213." ::= { portProtectAppEntry 1 } ifGroupIDApp OBJECT-TYPE SYNTAX INTEGER(1..32) ACCESS read-write STATUS mandatory DESCRIPTION "The groupID of port protect. The range is 1-32. The same value as groupID in portProtectGroupEntry." ::= { portProtectAppEntry 2 } END